ABC cycle counting gives a warehouse supervisor a starting point for Monday’s count list. Eighteen Class A locations are due this week. Across the aisle, a picker has twice come up short on a Class B item, even though the warehouse management system (WMS) shows enough stock to fill both orders. With time to check 40 locations, which ones should make the list?
Put the Class B location on Monday’s list. Two failed picks give the team a specific reason to investigate while the people who handled the orders can still recall what happened. Keep the 18 Class A locations on the weekly schedule, then work out how many of the remaining slots are already committed.
That last step is easy to miss. A count schedule needs room for the work the warehouse can predict and the discrepancies that turn up between shifts.
What is ABC cycle counting?
ABC cycle counting is a way to verify inventory throughout the year by assigning items to priority classes and setting a count frequency for each class. A common starting point is annual usage value. Multiply the number of units issued in a year by the cost per unit, rank the SKUs from highest to lowest, and use their cumulative share of value to set the A, B and C boundaries. Class A generally receives the most frequent checks.
Consider two spare parts. The warehouse issues 600 units of one at $80 each, giving it an annual usage value of $48,000. It issues 8,000 units of the other at $3 each, for $24,000. The first part ranks higher by value even though the second moves more often. If the second part repeatedly causes short picks, its class can stay the same while the supervisor orders an extra check.
Classification answers one question: how often should this SKU come up for routine verification? A recent movement, a customer shortage or a previously unresolved count can give the team a reason to check it sooner.
Turn the ABC count frequency into a workload
Decide what counts as one task before setting frequencies. In this example, one task means checking one SKU at one storage location. An item held in a pick face and two reserve bins creates three tasks when all three locations are due. A schedule based only on the number of SKUs would miss two visits.
Suppose a warehouse has 440 active SKU-location pairs and plans around 50 working weeks. Here is one possible policy and the work it creates.
| Class | SKU-location pairs | Example frequency | Routine checks per year | Weekly average |
|---|---|---|---|---|
| A | 75 | Monthly, 12 times a year | 900 | 18 |
| B | 150 | Quarterly, 4 times a year | 600 | 12 |
| C | 215 | Annually | 215 | 4.3 |
| Total | 440 | 1,715 | 34.3 |
At 40 checks a week, the team has annual capacity for 2,000 tasks. After the 1,715 routine checks, 285 slots remain for exceptions and recounts, or about five to six a week. Stagger the monthly due dates across the A locations. If all 75 come due on the last Friday of the month, the annual arithmetic still works, but the shift schedule does not.
Check those estimates against time on the floor. A counter can walk between several adjacent pick faces in the time it takes to arrange access to one high rack. Record the minutes spent travelling, checking stock and reviewing discrepancies for a few shifts. Use that evidence to decide how many tasks a shift can actually finish.
A weekly warehouse count schedule for 40 locations
For the week in our example, five Class C locations are due. Alongside the 18 Class A and 12 Class B locations, that leaves five slots. Give the first one to the Class B pick face that caused the two short picks. The other four can absorb follow-up work as the week unfolds.
| Day | Routine checks due | Extra capacity | What the supervisor does |
|---|---|---|---|
| Monday | 4 A, 2 B, 1 C | 1 | Check the pick face linked to both failed orders before its next replenishment. |
| Tuesday | 4 A, 2 B, 1 C | 1 | Reserve time to verify the source bin if Monday’s movement history points there. |
| Wednesday | 4 A, 2 B, 1 C | 1 | Group the due checks by aisle and keep time available for an independent recount. |
| Thursday | 3 A, 3 B, 1 C | 1 | Review any new discrepancies with the shift lead before assigning the extra check. |
| Friday | 3 A, 3 B, 1 C | 1 | Close outstanding checks or bring forward the next due location if the slot is free. |
Each day has eight slots. Give every assigned task a rack address, SKU, due date and owner. Record the physical count and observation time against the same task. If someone brings a future count forward, update its completion date and check when the next count falls due. Otherwise, the same bin can appear again on Monday while another goes unvisited.
What to do when the physical count disagrees with the WMS
At 9:10 on Monday, the counter finds six cartons at the problem pick face. The WMS shows ten. Before anyone posts a four-carton adjustment, the supervisor checks which transactions were included in the 9:10 balance. A transfer of four cartons from reserve was confirmed at 8:55. Did those cartons actually reach the pick face?
That question narrows the search to the source bin, the destination and any handover point between them. Ask a second person to recount the pick face without seeing the expected quantity. If the four cartons are still in reserve, the supervisor can investigate the transfer and correct the relevant record under the warehouse’s approval procedure. Simply reducing the pick-face balance would leave the source location wrong.
A readable carton label identifies what the counter found. The rack address establishes where it was found. Digitalplace.ai illustrates the distinction with two positions in the same bay, one level apart, in its guide to warehouse bin location numbering.
Where a warehouse inventory drone fits into the schedule
Some of the 18 Class A locations may sit on upper rack levels. Once the supervisor has selected the aisle and locations, a scheduled scan can collect physical observations for the team to review. For example, the WMS assigns a carton to A-03-04, while its QR code is observed at A-03-05. The inventory controller now has two specific addresses and a carton identifier to investigate.
For high-bay checks, the warehouse inventory drone from Digitalplace.ai can help verify stock locations and flag positions that appear empty despite an expected stock record. An obscured carton label still needs follow-up. Record it as unreadable and assign someone to verify it before making a quantity adjustment. For a closer look at which tasks stay with the warehouse team, see drone cycle counting vs. manual cycle counting.
How to tell whether the count schedule is working
By Friday afternoon, the team may have finished every routine check and still have two discrepancies awaiting investigation. Both facts belong in the handover. Digitalplace.ai’s guide to warehouse KPIs explains how to track completion against the checks that were due. Use three figures from this example to read the week’s results:
- Routine count completion: If all 35 due checks were completed, completion is 35 ÷ 35, or 100%. Track extra checks separately so they cannot hide an overdue task.
- First-count agreement: If 32 of those 35 counts matched the recorded quantity on the first attempt, agreement is 32 ÷ 35, or 91.4%. Keep the original result even if a later correction resolves the difference.
- Open discrepancies: If one of the three differences was resolved, two remain open. Give each an owner, a next action and a review date.
On the next shift, the most useful line in the handover might be just one sentence: “Four cartons are still recorded at the pick face; verify the reserve bin before the next transfer.” That gives the incoming supervisor a place to start, even on a week when the completion figure reads 100%.
Frequently asked questions
How often should A, B and C items be cycle counted?
Monthly for A, quarterly for B and annually for C is one schedule to test. Multiply each frequency by the number of active SKU-location pairs, then compare the annual workload with the time available. Increase the frequency for a particular item or location when repeated discrepancies justify the additional checks.
What happens if a Class B location needs an urgent count and every slot is full?
Identify the lowest-risk routine check that can move within its due window, assign it a new time and record the change. If every remaining check is already due, the supervisor can allocate more time or report a deferral. Keeping the deferred task visible makes next week’s workload easier to plan.
Can one visit count as both an exception check and a scheduled count?
Yes, if the visit covers the same SKU and location, meets the full routine count procedure and falls within the permitted count window. Record one physical visit, link it to both reasons and close the routine task once. If the visit only confirms that a carton label is visible, keep any outstanding quantity check on the schedule.




